1.5-9.7-Gb/s Complete 4-PAM Serial Link Transceiver with a Wide Frequency Range CDR

A complete 4-level pulse amplitude modulation (4-PAM) serial link transceiver including a wide frequency range clock generator and clock data recovery (CDR) is proposed in this paper. A dual-loop architecture, consisting of a frequency locked loop (FLL) and a phase locked loop (PLL), is employed for the wide frequency range clocks. The generated clocks from the FLL (clock generator) and the PLL (CDR) are utilized for a transmitter clock and a receiver clock, respectively. Both FLL and PLL employ the identical voltage controlled oscillators consisting of ring-type delay-cells. To improve the frequency tuning range of the VCO, deep triode PMOS loads are utilized for each delay-cell, since the turn-on resistance of the deep triode PMOS varies substantially by the gate-voltage. As a result, fabricated in a 0.13-mu m CMOS process, the proposed 4-PAM transceiver operates from 1.5 Gb/s to 9.7 Gb/s with a bit error rate of 10(-12). At the maximum data-rate, the entire power dissipation of the transceiver is 254 mW, and the measured jitter of the recovered clock is 1.61 ps(rms).