Nokia IP installation & commissioning training and certification
Schedule IP deployment VR training and exams,
and become certified
Take advantage of immersive VR technology and experience a more cost-effective, greener, and flexible alternative to traditional in-person training. By creating a virtual environment that replicates real-world scenarios, this program provides learners with an interactive and engaging learning experience that enhances knowledge retention and skills development.
7250 IXR-e
7250 IXR-e Installation & Commissioning Course
Course duration: 1-day
Price: €800
Course number: ER00077-V-0222
Course overview
This virtual instructor-led hands-on course with optional certification provides participants with a thorough understanding of the installation procedures of the chassis, modules, and power units for the 7250 IXR-e. The participant will also learn how to perform basic commissioning through the command line.
Learning format
This course combines virtual instructor-led training (vILT), Virtual Reality (VR), and remote lab access to deliver an engaging and immersive experience.
To attend this training, you must provide your own Meta Quest 2 or 3 Virtual Reality headset and set it up in advance.
You will practice step-by-step procedures with exact 3D versions of the hardware using your VR headset to perform the installation in a safe and risk-free environment.
Audience
Personnel responsible for installation and commissioning:
- Deployment professionals
- Field installation technicians and operators
Mandatory prerequisites
To register for this course, you must complete the following eLearning:
- ESD & Calibration Awareness – eLearning - LMQ114-W-1907 (30-minutes)
- 7250 IXR Product Overview – eLearning - ER00327-W-2001 (30-minutes)
Certification and exams (optional)
To become certified, you will need to register here for the proctored exams held on the morning after the training. You will be required to pass a written exam and a two-part practical exam administered virtually by an instructor. Exams require an 80% passing score to become certified. You must have completed the 7250 IXR-e Installation & Commissioning Course within the past year to be eligible to take the exams.
- Exam duration: 1 hour (allow 1.5 hours for the entire process)
- Price: €350
Learning objectives
- Site preparation: rack requirements, power requirements, and grounding
- Cable management: handling, routing, and labelling
- Hardware installation: rack, power, cables, and modules
- Commissioning: Boot-up system and provisioning of the cards via CLI and provisioning via pre-build configurations
- Troubleshooting: card, port and boot-up troubleshooting procedures and remedial action
Contents
- Module 1 - Introduction
- Module 2 - 7250 IXR-e Site Preparation & Installation
- Module 3 - 7250 IXR-e Practical Installation Session (VR)
- Module 4 - 7250 IXR-e Commissioning Training
- Module 5 - 7250 IXR-e Commissioning Lab Session
- Module 6 - 7250 IXR-e Nokia Learning Space Virtual Reality Lab
- Module 7 - 7250 IXR-e Remote Commissioning Lab
7220 IXR-d
7250 IXR-e Installation & Commissioning Course
Course duration: 1-day
Price: €800
Course number: ER00077-V-0222
Course overview
This virtual instructor-led hands-on course with optional certification provides participants with a thorough understanding of the installation procedures of the chassis, modules, and power units for the 7250 IXR-e. The participant will also learn how to perform basic commissioning through the command line.
Learning format
This course combines virtual instructor-led training (vILT), Virtual Reality (VR), and remote lab access to deliver an engaging and immersive experience.
To attend this training, you must provide your own Meta Quest 2 or 3 Virtual Reality headset and set it up in advance.
You will practice step-by-step procedures with exact 3D versions of the hardware using your VR headset to perform the installation in a safe and risk-free environment.
Audience
Personnel responsible for installation and commissioning:
- Deployment professionals
- Field installation technicians and operators
Mandatory prerequisites
To register for this course, you must complete the following eLearning:
- ESD & Calibration Awareness – eLearning - LMQ114-W-1907 (30-minutes)
- 7250 IXR Product Overview – eLearning - ER00327-W-2001 (30-minutes)
Certification and exams (optional)
To become certified, you will need to register here for the proctored exams held on the morning after the training. You will be required to pass a written exam and a two-part practical exam administered virtually by an instructor. Exams require an 80% passing score to become certified. You must have completed the 7250 IXR-e Installation & Commissioning Course within the past year to be eligible to take the exams.
- Exam duration: 1 hour (allow 1.5 hours for the entire process)
- Price: €350
Learning objectives
- Site preparation: rack requirements, power requirements, and grounding
- Cable management: handling, routing, and labelling
- Hardware installation: rack, power, cables, and modules
- Commissioning: Boot-up system and provisioning of the cards via CLI and provisioning via pre-build configurations
- Troubleshooting: card, port and boot-up troubleshooting procedures and remedial action
Contents
- Module 1 - Introduction
- Module 2 - 7250 IXR-e Site Preparation & Installation
- Module 3 - 7250 IXR-e Practical Installation Session (VR)
- Module 4 - 7250 IXR-e Commissioning Training
- Module 5 - 7250 IXR-e Commissioning Lab Session
- Module 6 - 7250 IXR-e Nokia Learning Space Virtual Reality Lab
- Module 7 - 7250 IXR-e Remote Commissioning Lab
7220 IXR-d Installation & Commissioning Course
Course duration: 1-day
Price: €800
Course number: ER00078-V-1023
Course overview
This virtual instructor-led hands-on course with optional certification provides participants with a thorough understanding of the installation procedures of the chassis, modules and power units for the 7220 IXR. The participant will also learn how to perform basic commissioning through the command line.
Learning format
This course combines virtual instructor-led training (vILT), Virtual Reality (VR), and remote lab access to deliver an engaging and immersive experience.
To attend this training, you must provide your own Meta Quest 2 or 3 Virtual Reality headset and set it up in advance.
You will practice step-by-step procedures with exact 3D versions of the hardware using your VR headset to perform the installation in a safe and risk-free environment.
Audience
Personnel responsible for installation and commissioning:
- Deployment professionals
- Field installation technicians and operators
Mandatory prerequisites
To register for this course, you must complete the following eLearning:
Certification and exams (optional)
To become certified, you will need to register here for the proctored exams held on the morning after the training. You will be required to pass a written exam and a two-part practical exam administered virtually by an instructor. Exams require an 80% passing score to become certified. You must have completed the 7220 IXR-d Installation & Commissioning Course within the past year to be eligible to take the exams.
- Exam duration: 1 hour (allow 1.5 hours for the entire process)
- Price: €350
Learning objectives
- Site preparation: rack requirements, power requirements, and grounding
- Cable management: handling, routing, and labelling
- Hardware installation: rack, power, cables, and modules
- Commissioning: Boot-up system and provisioning of the cards via CLI and provisioning via pre-build configurations
- Troubleshooting: card, port and boot-up troubleshooting procedures and remedial action
Contents
- Module 1 - Introduction
- Module 2 - 7220 IXR-d Site Preparation & Installation
- Module 3 - 7220 IXR-d Practical Installation Session (VR)
- Module 4 - 7220 IXR-d Commissioning Training
- Module 5 - 7220 IXR-d Commissioning Lab Session
- Module 6 - 7220 IXR-d Nokia Learning Space Virtual Reality Lab
- Module 7 - 7220 IXR-d Remote Commissioning Lab
Hardware and setup for VR
Learn about the VR hardware and setup required to attend a VR course and exam.